NIBP Monitoring
Measuring method: Automauc measurement by oscillating method
Initial cuff inflation pressure: (Adult mode: < 180 mmHg) (Infant mode: < 120 mmHg)
Overpressure protection limit: (Adult mode: 300 mmHg) (Infant mode: 240 mmHg)
Measuring range
Systolic pressure: (Adult: 40-225 mmHg) (Infant: 40-200 mmHg)
Diastolic pressure: (Adult: 20-215 mmHg) (Infant: 20-165 mmHg)
Mean arterial pressure: (Adult: 10-195 mmHg) (Infant: 10-150 mmHg)
Measurement accuracy: (Systolic ± 10%) (Diastolic ± 10%) (MAP ± 10%)
Measurement mode: Manual, Auto, STAT
Automatic measuring: 1-240min
TEMP Monitoring
Measuring range, accuracy: 25.0 – 45.0°C, ± 0.2°C
SpO2 & Pulse Rate Monitoring
Trasducer: dual-wave lenght LED
SpO2 measuring range: 35% – 100%
Low perfusion capability: 0.4% – 5%
SpO2 display accuracy: 70% – 100% ±3%
PR measuring range: 30 bpm – 250 bpm ± 2 bpm
ECG monitoring
Hearth rate measurement: ± 0.4 mVp – ± 5 mVp
Hearth rate display range: 20 – 250 bpm
Display accuracy: ± 1% or ± 2 bpm, whichever is greater (Wide option of screen views available)
Heart rate alarm delay time: = 10s
Sensitivity selection: Auto, x1/2, x1, x2, x4 (tolerance: = 5%)
Sweeping speed: 12.5 mm/s, 25 mm/s, 50 mm/s (tolerance: = 10%)
Common-mode rejection ratio: = 89 dB
Frequency response mode: (Monitoring: 0.5 – 40 Hz) (Diagnostic: 0.05 – 75 Hz)
RESP Monitoring
Monitoring range, accuracy: 0 – 120 rpm, ±5% or 2 rpm, whichever is greater
RESP alarm range: 0 – 100 bpm ± 10%
Other Technical Specifications
Power supply: 100 – 250 Vac, 50/60 Hz <80VA
Networking port: serial/Net port
